Suche starten
Sign in

Here you get access for your webmail!

Enter your e-mail address:

Password:

Schaller-Bridge "Hannes"

Everything that a guitar maker needs to know about installing Schaller's new "Hannes" bridge can be found on this page:
 

Technical drawings: Hannes 6


Technical drawings Guitar Bridge Hannes You can download here the technical drawings.

 

 

Technical drawings: Hannes Accessoires


Technical drawings Guitar Bridge Hannes

You can download here the technical drawings.

 

 

Installation template

 

Schaller Bridge Hannes Installation InstructionsYou can download here the installation template.
Please ensure when printing, to set following settings so that the template is printed to the correct 1:1 scale:
- Page handling/Page Scaling are set to "None"
- “Choose Paper Source by PDF page size” enable
- “Auto-Rotate and Center” disabled

 

 

 

 

 

 

 

Installation instructions

Installation instructions Schaller Guitar Bridge HannesYou can download here the installation instructions.

 

 

 

 

 

 

 

 

 

 

 

Tools, machines and materials required:

  • Transparent paper for template
  • Drill bit for bridge mounting:                   5.5mm / 13mm
  • Drill bit for string ferrules:                       6mm
  • Flat drill
  • Box column drill

The scope of supply includes the following accessories:

  • 6 piec. Ferrules
  • 2 piec. Wood screws LK 2,5x11,5
  • 2 piec. Mounting screws SK M5x50
  • 2 piec. Screw sockets (13,0mm)
  • 3 piec. Allen Key (2,0/2,5/3,0 mm)

 


 

Schaller Hannes Piezo cable layout and earthing.
A connection must be formed between each of the string sockets (or at least one in every two) and the potentiometer or the switch, either by soldering or crimping.

Schaller Hannes Piezo Kabelführung und ErdungSchaller Hannes Piezo Kabelführung und Erdung


  • Our Schaller "Hannes" bridge can be fitted to any guitar, provided that the body is flat at the point where the bridge is to be placed.

Begin by setting the Schaller "Hannes" bridge up in such a way that the intonation screws are in the mid-way position (~ saddles are flush to the bridge).
Schablone Schaller-Steg HannesSchablone Schaller-Steg HannesThe front edge of the high E-string's saddle must match up to the mensur line (place it accordingly).

 

The individual steps of the procedure are shown here:

Click on the pictures to view the full-size images.

 1.) Determining the mensur point
First mark out the center axis and the mensur on the body so that the template for the "Hannes" bridge can be positioned exactly right. Do this by laying a straight ruler of sufficient length on each side of the fretboard and marking the continued outline of the neck onto the body.Using the two lines, ...
...mark out on the guitar body the center axis required to position the bridge.
The mensur point is obtained by multiplying the measurement......from the nut...
...to the 12th fret (middle of the fret) by two; In our example, this is 323.85mm x 2 = 647.7mm, i.e. typical mensur for Fender instruments.The best thing to do is to use a tape measure to mark out the mensur on the central axis on the guitar body. Then extend the mensur point left and right (based on the central axis at a 90° angle to the center axis).
2.) Positioning the template
Now position the template on the axial cross you have drawn and fix it with adhesive tape (the line marked on the template must run over the axial cross).
 3.) Punch-marking the drill holes
Use a sharp flat drill to mark out the required drill holes.
 4.) Drilling the holes for the bridge mounting and guiding the strings
Once you have removed the template, you can drill the holes for the bridge to be mounted; now drill the holes for fixing the bridge and for the string ferrules (on the front of the body). In order to drill the holes exactly, a box column drill is absolutely necessary.
Drill bits with a centering tip should also be used - if available - in order for the holes to be drilled more precisely. A 5.5mm drill bit is required for the bridge mounting screws, and a 6mm bit for the string ferrules. Once the drilling work on the front of the body is completed, ...
...the two holes for the bridge mounting screws must be drilled out to 13mm diameter and 6mm depth on the rear of the body...
...to accomodate the two sockets for the two flat head screws.At this point, you can also check the toleranced dimensions for the bridge mounting screws.
If the bridge mounting screws are too long, they can be shortened using a metal saw and deburred using a file.The bridge can now...
 - as a test - be fitted in order ...
... to check that it sits correctly and that the mensur is correct.

We would like to take this opportunity to thank the guitar maker Thomas Amberger, from the Oberpfalz in Bavaria, for helping us to put together these installation instructions!!

 

 

 

 

BEST OF ALL WORLDS

Schaller’s “Hannes” Bridge

Schaller presents the guitar bridge of the future!
(US Patent #7071398/European Patent application submitted)

The Key Facts
  1. By far the most comfortable bridge on the market.
  2. The perfect combination of sound properties of all bridge constructions on the market.
  3. The sound is characterised by fine high notes and quick responsiveness, with distinct, powerful and even playback.
  4. Contact-friendly material and a comfortably designed, edgeless surface.
  5. Non-wearing due to the lack of metallic coatings.
  6. Both fresh and subdued in appearance, it further emphasises the guitar’s premium design.
The Innovations
  1. Each string is fed via a separate coupler unit individually adjustable in terms of intonation and height (saddle/string plate)..
  2. The individual couplers lie flat on the guitar surface.
  3. The bridge unit vibratory mass has been minimised.
  4. The bridge is low-maintenance and is comfortable to play.

This new high-tech guitar bridge was developed over a number of years by Roland Hannes, a French inventor now living in California. Thanks to a partnership formed together with the world’s most renowned hardware manufacturer, Schaller Electronics, it can now be produced and supplied on a large scale.

The Schaller “Hannes” Bridge Innovations in Detail

Each string is fed via a separate coupler which is individually adjustable in terms of intonation and height.

Schaller-Bridge While conventional guitar bridges feed all six strings via a common carrier, be it a Tune-O-Matic bridge or bridges with an integrated base plate, Schaller’s “Hannes” bridge follows a new logic.
With this revolutionary concept, each string is fed via a separate coupler unit with individually adjustable intonation and height. It lies directly on the guitar surface and is free of intermediate elements such as stud screws, threaded studs or metal plates. This decouples the vibration of the individual strings from the neighbouring strings, allowing it to be transferred directly and independently to the guitar body.

The advantage of this system over those where all of the vibrating strings share a common carrier, is obvious:

If the strings are in a common carrier, then each of the individual vibrations is subject to the physical influence of the other vibrating strings in the group, thus compromising their harmonious response. This has undesirable crosstalk effects - the acoustic energy between the strings is nullified and/or, alternately, strengthened.

Not so with Schaller’s “Hannes” bridge. Here, every string vibrates on its own because all of the transfer points, namely the bridge, are consistently decoupled from one another. This improves the harmony response and the “string-to-string definition”.

The individual bridges lie flat on the guitar surface.

Schaller-Bridge A further improvement over conventional designs is the larger contact surface over which the vibrations are carried from the bridge to the body. Depending on the design, the coupling with conventional bridges is via tiny stud screws or knife edge tabs only. Therefore, these types of small transfer surfaces are also known as “micro-coupling”.

In this context, if you consider the classic string instrument construction which has been based for centuries on the ideal vibration coupling of string and body, the generous dimensions of the contact surface between the bridge and the top makes sense. This is precisely the case with the most expensive jazz guitars, and with good reason!

Here, too, Schaller’s “Hannes” bridge offers a true innovation:
Despite being individually adjustable for height and length (octave clarity), the couplers lie flat and stable on the guitar surface and thus ensure the optimal transfer of the entire vibration spectrum to the instrument. Micro-coupling causes inadequate transfer of those very deep frequencies in particular, which are considered essential in electric guitars today. With this, Schaller’s “Hannes” bridge is an innovation you can truly hear.

The bridge unit vibratory mass has been minimised.

Schaller-Bridge Inventor Roland Hannes took another step towards further optimising the acoustic responsiveness. He addressed the issue of mass – that means the reduction of the vibratory mass of the bridge unit. His findings: the lower the vibratory mass, the quicker the tuning process and the lower the loss in the transfer of the sound spectrum to the instrument, from the lowest frequencies right up to the harmonics. The result is a direct, audible and tangible gain in dynamics.

His quest took him to the Canadian company Graph Tech.
Hence the use of the latest composite material – heat-treated high-performance polymers with Teflon, known as “String Saver” - a patented development by Graph Tech. This revolutionary new composite material provides a further elementary advantage in addition to the remarkably low specific weight of 1.75 g/ccm* along with its tremendous rigidity and resistance.

Due to the incorporation of Teflon, the “String Saver” ensures astoundingly little friction on the string contact points, as if they were constantly being lubricated. The metal saddles generally used on guitar bridges (regardless of whether steel, aluminium or bronze) are not without their problems, because the strings gradually cut a narrow, sharp-edged groove in the surface, in which they ultimately become caught and can break as a result of fatigue fractures.

The “String Saver” string bridge’s lower friction counters the much feared risk of broken strings very effectively. At the same time the sustain, i.e. the reverberation of the vibrating strings against the steel saddles, is extended by about 15%, and by about 25% when compared to bronze saddles.

The bridge is low-maintenance and comfortable to play.

Schaller-Bridge The design of Schaller’s “Hannes” bridge means that it has no protruding screws, edges or spikes at all and the flat design guarantees outstanding playing comfort. Unlike coated metals, the surface is comfortably warm and completely resistant to the usual problems like hand perspiration and oxidation. At the same time, the use of Teflon means that the bridge offers a high degree of tuning stability.

Unlike with metal feeds, the strings can no longer become caught in grooves (one of the most proven frequent causes of tuning problems).

The revolutionary and consistent “form follows function” design available in Nickel, Chrome, SatinChrome, BlackChrome, Gold, Ruthenium, SatinPearl and VintageCopper also ensures an image which is as contemporary as it is future-oriented.

In conclusion, it must be mentioned that the bridge does not require any notches on the body surface at all. It is easily dismantled for cleaning and needs only a small perforated rail on the rear of the body to fix the ball ends of the strings, as well as two lock screws in order to secure is tightly

* Reference values:

  • Magnesium 1,74 g/ccm
  • Black TUSQ 1,75 g/ccm
  • Bone 1,80 g/ccm
  • Ivory 1,88 g/ccm
  • Aluminium 2,70 g/ccm